Electromagnetic Flow Meter

• OIML/CE/ MID 2014/22/EC, ISO 9001:2008 certified.

• available in sizes from DN 10 to 300 mm (3/8" ÷ 12");
• high grade stainless steel, titanium or tantalum integrated grounding and measuring electrodes;
• suitable for direct burial and constant flooding;
• easy commissioning, automatic uploading of calibration values and settings;
• high accuracy and stability of measurement;
• high resistance to external action;
• connection type - wafer (DN10, 15 mm), flanged (DN20-300 mm), threaded (DN15; DN32; DN50; DN 80 mm);
• full pipe detection;
• bidirectional flow measurement;
• suitable for mounting on polymer pipes;
• graphic backlit LCD, contactless keyboard;
• integrability into automatic industrial control systems;
• calculation of mass flow rate and total mass.
• Specification:

  Parameter	Value
  Nominal diameter of the pipeline, DN	10 ÷ 300
  Accuracy, %	from ± 0.35
  Repeatability, %	under 0.2
  Maximum pipeline pressure, MPa/bar - for standard-type connection - for threaded-type connection	2.5/25 (4.0/40 on request) 1.6/16
  Minimum conductivity, µS/cm	1
  Fluid temperature range, °??: - for PTFE lining	minus 10 ÷ 150
  Ambient temperature range, °??	minus 25 ÷ 70
  Protection	IP67 (IP68 on request)
  Power supply, VDC	24

  Outputs:
  • LCD;
  • 0-5, 0-20, or 4-20 mA analog output;
  • 2 pulse outputs;
  • RS-485 interface (Modbus or Profibus);
  • Ethernet;
  • control input (button).
  Design material:
  • flanges and housing – carbon steel;
  • lining – PTFE;
  • electrodes – stainless steel, titanium, tantalum, etc.
  • Application:
    • water abstraction;
    • water treatment;
    • water distribution network;
    • custody transfer flow meters;
    • irrigation;
    • waste water treatment;
    • filtration plants;
    • industrial water applications;
    • acids, alkalis, alkaline solutions, reagents;
    • paper pulps;
    • liquid foods.

• OIML/CE/ MID 2014/22/EC, ISO 9001:2008 certified.
• available in sizes from DN 20 to 300 mm (3/4"÷12");
• bidirectional flow measurement (on request);
• full-bore meter design eliminates pressure loss in measurement section;
• no filtering required;
• short straight pipe runs required for installation;
• protection against unauthorized access;
• suitable for mounting on polymer pipes;

• Outputs:
  • LCD;
  • 2 pulse outputs;
  • RS-485 interface (Modbus).
  Design material:
  • flanges and housing – carbon steel;
  • lining – PTFE;
  • electrodes – stainless steel.

Application : 

v Recording the total amount of cold water flowing through the pipe. 

v Multi-Jet Water Meters are widely used in residential buildings, including apartments, condominiums, and single-family homes. They help monitor individual water usage for billing purposes and promote water conservation. 

v  Multi-Jet Water Meters are also employed in commercial buildings such as offices, retail stores, hotels and restaurants. They provide accurate Measurement for water consumption, enabling businesses to manage their water usage and identify potential leaks or inefficiencies.